Akasel Aka-Resin Phenolic, black phenolic resin in a white plastic container with a handle. The label features the product name "Aka-Resin Phenolic," "Black Phenolic Resin for Hot Mounting," weight 2.5 kg, Item No. 21501122 (8055), and curing instructions at 160–180 °C. Additional text outlines curing times and parameters for samples with diameters ranging from 25 mm to 50 mm. Specially developed for metallographic applications to prepare samples for further analysis.

Aka-Resin Phenolic

Black phenolic resin for hot mounting. The most economic embedding choice. Ideal for back-filling when working with more expensive resins like Aka-Resin Epoxy.

Curing specifications
Dia., force, heating/cooling time:
25 mm: 10 kN, 4-5 min/3-4 min
30 mm: 20 kN, 4-6 min/3-4 min
40 mm: 30 kN, 5-7 min/4-6 min
50 mm: 50 kN, 6-9 min/5-7 min

Cure at 160 – 180 °C, 250 bar, high cooling rate.

If the mount is not fully cured, increase time.

The parameters above can vary a lot depending on the characteristics of the mounting press used.

Categories: ,

Description

Content available: 2,5 kg, 7,5 kg

SDS Aka-Resin Phenolic (EN)

 

Additional information

Content available

2.5 kg, 7.5 kg

Related products

  • Akasel Protection Caps in bright red, displayed in three different sizes: 30 mm, 40 mm, and 50 mm. The round caps are open and made of flexible material, specially designed for metallographic applications to safeguard sample surfaces after preparation. Perfect for avoiding scratches and damage during storage.

    Mounting

    Protection Cap

  • Akasel Aka-NoStick Powder in a clear plastic bottle with a white screw cap. The label features the product name "Aka-NoStick Powder" and the description "Mould release powder for hot mounting presses." Additional details on the label: Contents 50 g, Item No. 21901105 (8410), made in Denmark. Specially developed for metallographic hot mounting presses to guarantee easy sample release.

    Mounting

    Aka-NoStick Powder

  • Akasel Aka-Resin Phenolic SEM, a white container with a lid holding black conductive phenolic resin. The label features the product name, "Black Conductive Phenolic Resin for Hot Mounting," a weight of 1 kg, and Item No. 21501721 (8070). It also provides curing times and specific parameters for sizes between 25 mm and 50 mm. Specially developed for metallographic applications, perfect for preparing conductive samples for scanning electron microscopy (SEM).

    Mounting

    Aka-Resin Phenolic SEM

  • Akasel Aka-Resin Phenolic-2, Black: Black phenolic resin in a white plastic container with a carry handle. The label includes the product name, "Black Phenolic Resin for Hot Mounting", the weight of 2.5 kg, the part number 21502122, and curing details such as: 160–180 °C at 25 mm: 7.5 kN, 6.5 minutes, along with additional force and time specifications for different sample diameters.

    Mounting

    Aka-Resin Phenolic-2, Black

Contact us