Akasel Aka-Resin Phenolic, black phenolic resin in a white plastic container with a handle. The label displays the product name "Aka-Resin Phenolic," "Black Phenolic Resin for Hot Mounting," weight 2.5 kg, Article No. 21501122 (8055), and curing instructions at 160–180 °C. Additional details specify curing times and parameters for samples with diameters from 25 mm to 50 mm. Specifically designed for metallographic applications to prepare samples for further analysis.

Aka-Resin Phenolic

Black phenolic resin for hot mounting. The most economic embedding choice. Ideal for back-filling when working with more expensive resins like Aka-Resin Epoxy.

Curing specifications
Dia., force, heating/cooling time:
25 mm: 10 kN, 4-5 min/3-4 min
30 mm: 20 kN, 4-6 min/3-4 min
40 mm: 30 kN, 5-7 min/4-6 min
50 mm: 50 kN, 6-9 min/5-7 min 

Cure at 160 – 180 °C, 250 bar, high cooling rate.

If the mount is not fully cured, increase time.

The parameters above can vary a lot depending on the characteristics of the mounting press used.

Categories: ,

Description

Content available: 2,5 kg, 7,5 kg

SDS Aka-Resin Phenolic (EN)

 

Additional information

Content available

2.5 kg, 7.5 kg

Related products

  • Akasel Aka-Resin Phenolic SEM, a white container with a lid containing black conductive phenolic resin. The label displays the product name, "Black Conductive Phenolic Resin for Hot Mounting," the weight of 1 kg, and Article No. 21501721 (8070). It also includes curing times and specific parameters for sizes ranging from 25 mm to 50 mm. Specifically designed for metallographic applications, ideal for the preparation of conductive samples for scanning electron microscopy (SEM).

    Mounting

    Aka-Resin Phenolic SEM

  • Akasel Protection Caps in vibrant red, shown in three different sizes: 30 mm, 40 mm, and 50 mm. The round caps are open and made of flexible material, specifically designed for metallographic applications to protect sample surfaces after preparation. Ideal for preventing scratches and damage during storage.

    Mounting Accessories

    Protection Cap

  • Akasel Aka-NoStick Powder in a transparent plastic bottle with a white screw cap. The label displays the product name "Aka-NoStick Powder" and the description "Mould release powder for hot mounting presses." Additional details on the label: Contents 50 g, Article No. 21901105 (8410), made in Denmark. Specifically designed for metallographic hot mounting presses to ensure easy sample release.

    Mould Release Agents

    Aka-NoStick Powder

  • Akasel Aka-Resin Phenolic-2, Black: Black phenolic resin in a white plastic container with a carrying handle. The label displays the product name, "Black Phenolic Resin for Hot Mounting", the weight of 2.5 kg, the article number 21502122, and curing instructions such as: 160–180 °C at 25 mm: 7.5 kN, 6.5 minutes, along with additional force and time specifications for various sample diameters.

    Mounting

    Aka-Resin Phenolic-2, Black

Contact us here