Product image of Aka-Resin PP, Green – a 2.5 kg container of reinforced polypropylene resin for hot mounting. The label displays curing details and product number 21602668, with benefits like low shrinkage, strong adhesion, and smooth flow, suitable for high-quality mounting applications.

Aka-Resin PP, Green

Green, mineral-filled polypropylene resin for hot mounting. Aka-Resin PP is a dust-free resin with low shrinkage, good adhesion and high/easy flow properties for high-quality mounts.

Curing specifications:
Dia., force, heating/cooling time:
25 mm: 15 kN, 5–7 min / 3 min
30 mm: 25 kN, 5–7 min / 3 min
40 mm: 30 kN, 6–8 min / 4 min
50 mm: 45 kN, 8–10 min / 5 min

Cure at 160 – 180 °C, 250 bar, high cooling rate

If the mount is not fully cured, increase time.

The parameters above can vary depending on the characteristics of the mounting press used.

Categories: , ,

Description

Content available: 2.5 kg, 7.5 kg, 30 kg (4 x 7.5 kg)

SDS Aka-Resin PP (EN)

Aka-Resin PP Fact Sheets (EN)

Hot Mounting Product Brochures (EN)

Additional information

Content available

30 kg (4 x 7.5 kg), 2.5 kg, 7.5 kg

Related products

  • Product image of Aka-Resin PP, Black – a 2.5 kg container of reinforced polypropylene resin used for hot mounting. The label shows product number 21602670 and outlines key benefits such as low shrinkage, strong adhesion, and easy flow, ideal for producing high-quality mounts.

    Aka-Resin PP

    Aka-Resin PP, Black

  • Akasel Protection Caps in vibrant red, shown in three different sizes: 30 mm, 40 mm, and 50 mm. The round caps are open and made of flexible material, specifically designed for metallographic applications to protect sample surfaces after preparation. Ideal for preventing scratches and damage during storage.

    Mounting

    Protection Cap

  • Product image of Aka-Resin PP, Red – a 2.5 kg bucket of reinforced polypropylene resin designed for hot mounting. The container label includes curing parameters and product number 21602671, promoting low shrinkage, excellent adhesion, and easy flow for precise, high-quality mounts.

    Aka-Resin PP

    Aka-Resin PP, Red

  • Product image of Aka-Resin PP, Orange – a 2.5 kg container of reinforced polypropylene resin for hot mounting. The white bucket features a detailed label with curing instructions and product number 21602672, highlighting its low shrinkage, strong adhesion, and easy flow properties ideal for high-quality mounts.

    Aka-Resin PP

    Aka-Resin PP, Orange

  • Akasel Aka-NoStick Powder in a transparent plastic bottle with a white screw cap. The label displays the product name "Aka-NoStick Powder" and the description "Mould release powder for hot mounting presses." Additional details on the label: Contents 50 g, Article No. 21901105 (8410), made in Denmark. Specifically designed for metallographic hot mounting presses to ensure easy sample release.

    Mounting

    Aka-NoStick Powder

Contact us here